Rough Installation At Near Completion

The Rough Installation of my BFA Art Project is at a near completion, however, it may seem that I have encountered more technical issues, not really materials. First issue I ran into is that the HDMI cables were kind of short for the projector as the projector was set to the highest height it can be set for the stands. With it, I also forgot to get a power strip due to numerous requirements for outlet usage (3 outlets are required per each installation - 1 for Projector, 1 for TV/Monitor, and 1 for Computer). I also brought my own desktop since it's the only desktop available around me that has 2 HDMI ports for the installation, but I will be bringing in another PC of my own since it also has 2 HDMI ports as well.

The second issue I ran into is that the second projector mount that I have, the screw adapter itself broke. The cause of the damage to the screw adapter is one of the projectors I've used caused an unbalanced weight to drag the screw to snap and break the inside of the adapter. It is quite possible to fix, but very difficult to do so. The seller I have talked to from Amazon was able to offer me free replacements and is on its way immediately.

Every other things I've done so far is just rough testings, especially Max coding. I will be using just a test code to make sure it functions the way I needed to be as it will need adjustments for resolution size. For now, and again, I only have one near completed rough installation.